The Beginners Guide To (Finding The Starting Point)

Undergoung Utilities and their Standard Colors

It is now easier to know what an underground utility line is for. The risk was high before when people could not easily identify the type of utility lines underneath whenever they dig. Although not completely eliminated, risks today have been reduced. In order to prevent harm, it is important to know or identify these utility lines if your need to dig the ground. Before digging through a certain piece of land, the OSHA requires that the underground utilities be located. It is to prevent disaster. Fatal injuries can happen if underground utility lines are struck. Services in the area where the lines are located can experience interruption. Before digging their property, people should call 811 to call the utility companies so that these incidents are prevented. Calling the 811 number will enable utility companies to come out and mark their respective utility lines.

But, despite the marks, there will sill be accidents. The reality is that there is an incident almost every 6 minutes where utility line are struck. Traffic lights, wastewater pipes, telecommunication lines, etc. are affected when lines are struck. Public heath and safety is affected when this happens.

GPR or Ground Penetrating Radar is used by companies to locate their utility lines. With this machine, companies can easily locate utility lines. Companies can locate their utility lines if any property owner calls 811.

It is easier to identify underground utility lines today because they now use different colors for each utility. The colors below indicate the kind of utility uses it.

If you see white lines, then these are proposed excavation sites. You can mark areas with white lines that will soon be excavated.

Pink lines are temporary survey markings. Legal property boundaries are marked off by these pink lines.

If you see red lines, then you can be sure that these are electric power lines, cable, conduit, and lighting cables. This color is appropriate for electrical works since it is associated with fire and danger.

Yellow lines are used for gas, oil, steam, petroleum, and gaseous materials. Bright yellow is an appropriate warning color since it is very disastrous to have a natural gas leak.

If you see orange lines, then you should associate this with communication., alarm, signal lines, cable or conduit. Lines for potable water use blue lines. Reclaimed water, irrigation, and slurry lines used purple lines. Green lines are used for sewer and drain lines. You can derail any project for a long time if you hit these lines.

Click here now if you want to learn more about the color coding of utility lines. View here for more.

Attributed by: site web